APPLYING RISE AND RUN TO THE SQUARE
Rise Per Foot of Run
ORIENTING YOUR WORK TO THE DRAWINGS
Rafter as it appears on the wall.
Rafter as it appears on the ground.
Establishing a uniform point of reference on non-dimensional material
Marking The Top Cut Line
Stepping Off The Run
Marking Off The Seat Of The Rafter
GABLE HEIGHT AND RIDGE BEAM POSITION
Rafters Butted Against the Sides of the Ridge Beam
Rafters Resting on Top of the Ridge Beam
Joining Rafters with Differing Pitch
Stepping Off a Fraction of a Foot of Run